Universal cutting discs. Ordering data M 02/A-B-C
Within our series of universal cut-off wheels, you can find these references, which can be used for cutting different materials, from wood, plastics, composites, and non-ferrous metal alloys. These discs are designed so that the chips are properly removed during cutting, while not allowing excessive feed rates.
Specification teeth discs cross and longitudinal cut M02
Universal cutting discs. Ordering data M 02/A-B-C
Within our series of universal cut-off wheels, you can find these references, which can be used for cutting different
materials, from wood, plastics, composites, and non-ferrous metal alloys. These discs are designed so that the chips are
properly removed during cutting, while not allowing excessive feed rates.
These are the specifications :
- The angle of attack of these discs is 12º.
- Alternating tooth pitch with 10º of inclination
- Tooth width between 2.5 mm and 5.0 mm
- Diameters between 100 mm and 550 mm
Available sizes :
|
M 02/A |
|||
|
Ø mm |
SP |
Z |
Øf |
|
100 |
3,2 |
16 |
20/30 |
|
140 |
3,2 |
24 |
20/30 |
|
150 |
3,2 |
24 |
20/30 |
|
180 |
3,2 |
28 |
20/30 |
|
200 |
3,2 |
32 |
30/35 |
|
225 |
3,2 |
36 |
30/35 |
|
250 |
3,2 |
40 |
30/35 |
|
300 |
3,2 |
48 |
30/35 |
|
350 |
3,5 |
54 |
30/35 |
|
400 |
3,8 |
60 |
30/35 |
|
450 |
4,2 |
72 |
30/35 |
|
500 |
4,2 |
80 |
30/35 |
|
550 |
5,0 |
96 |
35 |
|
M 02/B |
|||
|
Ø mm |
SP |
Z |
Øf |
|
125 |
2,5 | 24 | 20/30 |
|
140 |
2,5 | 24 | 20/30 |
|
150 |
2,5 | 24 | 20/30 |
|
180 |
2,5 | 28 | 30/35 |
|
200 |
2,5 | 32 | 30/35 |
|
250 |
2,5 | 40 | 30/35 |
|
300 |
2,5 | 48 | 30/35 |
|
350 |
3,0 | 54 | 30/35 |
|
M 02/C |
|||
|
Ø mm |
SP |
Z |
Øf |
|
150 |
4 | 24 | 30/35 |
|
180 |
4 | 28 | 30/35 |
|
200 |
4 | 32 | 30/35 |
|
250 |
4 | 40 | 30/35 |
|
300 |
4 | 48 | 30/35 |
|
350 |
4 | 54 | 30/35 |
