2 to 4 times more performance. FLAI Nanograin Saw Blades.

FLAI Nanograno saw blades. Get from 2 to 4 times more cutting performance against the competitors.

The Ceratizit SinterHIP NANOgrano hard metal, worldwide exclusive of FLAI, offers from 2 to 4 times more cutting performance than similar products from competitors. HECOMA® is the exclusive distributor of FLAI for the  Iberian peninsula.

HECOMA® distributes,  exclusively for the whole peninsula, the best performance saw blades of the Italian manufacturer FLAI. The DPS-ALX series, and its cutting surfaces made with the exclusive Ceratizit Sinter HIP hard metal, offer superior performance than competitors. In the studies and tests carried out in the laboratory, under real working conditions, yields between 2 and 4 times higher than similar tools from competitors, has been obtained.

The innovative technology is not used only in the cutting material used:

  • The steel body of very high strength and quality, forged and tempered with exclusive techniques, one by one, provides minimal deformation and zero vibrations during cutting work.
  • The hard industrial chrome coating provides wear resistance and chemical stability against corrosion.
  • Its high precision manufacturing, provides better finish and a much longer tool life than its competitors.

Results of the comparative test in the laboratory

Laboratory test. Bi-laminated material panels cutting.
Laboratory test. Bi-laminated material panels cutting.

For the test, the discs are used for cutting bi-laminated material panels. The measurement of the tool life is determined according to the number of chips removed* from the material during cutting. A greater number of chips, is due to a worse state of the cutting surface edge. * If the edge loses quality, instead of cutting the outer surface of the panel, chips from this are torn off during the work, resulting in a poor finish.

In the test, as a comparative reference, saw blades from 2 alternative manufacturers are used. The models used are  the indicated by each brand for the work that will be carried out. In the three manufacturers, the saw blades uses nanograno  hard metal with the following basic specifications:

  • Diameter: 350mm.
  • Plate thickness:  3,0 to 3,2  mm (depending on the manufacturer).
  • Cutting kerf: 4,45 mm.
  • Teeth number : 72.
  • Bore: 30mm.
  • Nose reduction slots: 3 -13 (depending on the manufacturer)
  • Hook angle: 15º

We show you the results in the following images

Manufacturer «A» saw blade Results
Manufacturer "A" saw blade Results
Manufacturer «A» saw blade Results

In the upper images appear the photos of the cuts made in the upper part of the board used. In the lower images the results of the cut appear in the lower part of the same previous samples .

The test is interrupted when the 45 cuts arrive, since a large number of chips are produced.

Manufacturer «B» saw blade Results
Manufacturer "B" saw blade Results
Manufacturer «B» saw blade Results

In the upper images appear the photos of the cuts made in the upper part of the board used. In the lower images the results of the cut appear in the lower part of the same previous samples .

The test is interrupted when the 55 cuts arrive, since a large number of chips are produced.

Saw blade FLAI manufacturer results.  DPX-ALX series.
FLAI Manufacturer saw blade Results
FLAI Manufacturer saw blade Results

In the upper images appear the photos of the cuts made in the upper part of the board used. In the lower images the results of the cut appear in the lower part of the same previous samples .

The test is interrupted when the 100 cuts arrive, still retaining a superior quality of cut compared  with the two previous products.

 

Contact with  HECOMA® , exclusive distributor of FLAI products for the peninsula.

Making tools for the perfect performance